Description
Osmo UV-Protection Oil Extra is a natural oil-based finish which, used on its own, delays the natural greying of vertical wood surfaces up to 12 times compared with untreated wood. As a topcoat on already finished wood it significantly extends the maintenance interval. Active ingredients give preventive protection against algae and fungal attack. The microporous, water-repellent surface does not crack or peel.
Where to use
All vertical exterior wood: windows, carports, cladding and facades, fences, gazebos and summer houses.
Shades and can sizes
- 420 Clear (UV-Protection Oil Extra)
- 424 Spruce, 425 Oak, 426 Larch, 427 Douglas fir, 428 Red cedar, 429 Natural
- 431 Red cedar natural, 432 Light oak
Sizes 0.125 L, 0.75 L, 2.5 L and 25 L (432 up to 2.5 L). 1 litre covers approx. 18 m² per coat.
Application
Wood must be clean and dry (max. 20% moisture). Apply 2 thin coats with a natural bristle brush along the grain; no sanding required. Drying time approx. 12 hours per coat with good ventilation. For renovation, one coat on a cleaned surface is sufficient.
Safety
Keep out of the reach of children. Ensure good ventilation. Note – risk of spontaneous combustion: wash oily cloths and pads immediately or keep them in an airtight container. Clean tools with Osmo Brush Cleaner 8000.
Documents
- Osmo UV-Protection Oil – product information (PDF, in Estonian)
- Osmo UV-Protection Oil – safety data sheet (PDF, in Estonian)
Documents in other languages are available on request.
