Pay in three equal instalments 3 x 14.91€Description
Osmo Concrete Oil 610 is a clear satin-matt finish combining natural oils and waxes. It does not form a film but penetrates the pores – the surface stays microporous and repels dirt and water, and the concrete dusts less.
Where to use
For transparent impregnation of almost all types of concrete, screed, artificial and natural stone and unglazed tiles. For walls and floors in kitchens and bathrooms, table tops, window sills and kitchen worktops.
Can sizes and coverage
Sizes 0.75 L and 2.5 L. 1 litre covers approx. 50 m² per coat (depending on absorbency).
Application
The surface must be clean, dry and dust-free. Apply a thin, even coat with an Osmo floor brush, fleece cloth or microfibre roller and remove any excess. Allow to dry with good ventilation and apply a second thin coat if required.
Safety
Keep out of the reach of children. Ensure good ventilation. Note – risk of spontaneous combustion: wash oily cloths and pads immediately or keep them in an airtight container. Clean tools with Osmo Brush Cleaner 8000.
Documents
- Osmo Concrete Oil – product information (PDF, in Estonian)
- Osmo Concrete Oil – safety data sheet (PDF, in Estonian)
Documents in other languages are available on request.
